|
These recorders are designed for the Original
Equipment Manufacturer Market. The units are available as skeletons
(without case and door) or with doors only to provide cost savings.
Custom colors and logos enhance product appearance. In addition, the
unique "stock-one-unit" feature allows range and chart speed to be
customized and field changeable. Optional battery back-up with low
battery indication provides recording in the event of power
loss. | |
4 Inch, Single Pen, Skeleton w/door
6 Inch, Single Pen, Skeleton
8 Inch, Two Pen, Fully Cased |
|
|
Features: |
-
Microprocessor Based
- Rugged / durable construction
- One or two pen versions
- Battery back-up available
- 1 or 2 SPDT relay contacts
- 4", 6", 8", 10" diameter charts
- 110V/220V, 50/60Hz standard
|
-
Highly accurate
- Fast response time
- Simple push-button calibration
- Monitors temperature, voltage and/or
current
- Accepts both inkless and ink cartridge marking
systems
- Designed and manufactured in the
USA
|
|
|
|
|
|
|
|
|
*Specifications: |
|
Input Types: |
RTD, 0-1 volt, 0-5 volts, 1-5 volts, 0-10 volts,
4-20mA |
|
†Achievable Temperature Accuracy: |
+/- 0.25 º C (0.5 º F) |
|
†Achievable Voltage / Current Accuracy: |
+/- 0.25% of Span |
|
Chart Rotation Speed: |
7 day or 24 hour |
|
Ambient Operating Conditions: |
0 º to +40 º C, 0-95% RH,
Non-condensing |
|
Relay Contacts: |
1 Amp @ 120 VAC |
|
Pen Type: |
#1 Red, #2 Blue Fiber Tipped or #1 Pressure
Sensitive Stylus |
|
Battery Backup: |
One 9 Volt Alkaline Battery |
|
Battery Backup Life: |
Minimum 24 hours |
|
*Specifications are subject to change without
notice.
†Depends on probe type and standard used for calibration. |
| |
